Station Mangagement; Adding A Station; Deleting A Station; Viewing Station Status - Philips WACS57 User Manual

HD
Station management

Adding a station

You can add a station to an existing Wi-Fi
network of Center and Station. Up to 5 stations
can be connected to a WAC5 Center.
On Center
1
Switch on WAC5 Center and select HD source
2
To select Add New Station on Center
a. Press and hold STOP • MENU to enter the
MENU screen (or on remote control, press
MENU)
b. Use the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. In Station Mgnt menu, use the navigation
controls 3 or 4 and 2 to select
➜
You will enter the Installation Mode.
Searching for the new station starts
➜
Playback stops on the previously associated
Station if you are playing the HD source
On Station
3
Connect the new station to power supply
4
Select AUX mode and enter Installation
Mode by:
a. Press MENU
b. Use the navigation controls 3 or 4 and 2 to
select Installation Mode
On Center
5
Press STOP/Ç on the Center when all your
stations are found
Helpful hints:
– To change your setting of Wi-Fi connection, see
the manual Connect to your PC.
38

Deleting a station

1
Switch on WAC5 Center and select HD source
2
To select Delete Station on Center
a. Press and hold STOP • MENU to enter the
MENU screen (or on remote control, press
MENU)
b. Use the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. In Station Mgnt menu, use the navigation
controls 3 or 4 and 2 to select
➜
The Center 's display shows the list of
connected stations
3
Press 3 or 4 and 2 to select the station you
wish to delete
4
Press 3 or 4 and 2 to select Yes

Viewing station status

1
Switch on WAC5 Center and select HD source
2
To select Station Status on Center
a. Press MENU on the remote control
b. Use the navigation controls 3 or 4 and 2
to enter Station Mgnt menu
c. In Station Mgnt menu, use the navigation
controls 3 or 4 and 2 to select
➜
On the Center 's display shows the list of
stations connected or ever connected
3
Press 2 to view the connection information

Information about your WACS57

1
Switch on WAC5 Center (or WAS700 Station)
and select HD source.
2
To select Information on Center or Station
a. Press and hold STOP • MENU to enter the
MENU screen (or on remote control, press
MENU)
b. Use the navigation controls 3 or 4 and 2 to
enter Information menu
➜
The display shows: the name of Center or
Station, firmware version and free harddisk
space (for Center only)