Volvo S60 Owner's Manual page 182

WINDOWS, GLASS AND MIRRORS
Using the rain sensor's memory
function
The rain sensor automatically starts the wind-
screen wipers based on how much water it
detects on the windscreen.
Activating/deactivating the memory
function
The memory function for the rain sensor can
be activated in such a way that the rain sensor
button does not need to be depressed each
time the car is started:
1. Press Settings in the top view in the cen-
tre display.
2. Press My Car Wipers.
3. Select Rain Sensor Memory
deactivate the memory function.
Related information
Using the rain sensor (p. 179)
•
Using windscreen and headlamp washers
•
(p. 180)
Wiper blades and washer fluid (p. 177)
•
Filling washer fluid (p. 652)
•
Set the wiper blades in service position
•
(p. 651)
Replacing windscreen wiper blades
•
(p. 650)
Using windscreen wipers (p. 178)
•
180
Using windscreen and headlamp
washers
Windscreen and headlamp washers are
designed to clean the windscreen and head-
lamps. Windscreen and headlamp washers
are started using the right-hand stalk switch.
Starting windscreen and headlamp
washers
to activate/
Washing function, right-hand stalk switch.
Move the right-hand stalk switch toward
–
the steering wheel to start the windscreen
and headlamp washers.
> The windscreen wipers will make sev-
eral more sweeps once the stalk switch
has been released.
IMPORTANT
Avoid activating the washer system when
it is frozen or the washer reservoir is
empty, otherwise there is a risk of damag-
ing the pump.
Headlamp washing*
To save fluid, the headlamps are washed auto-
matically at a defined interval when the head-
lamps are switched on.
Reduced washing
If only approx. 1 litre (1 qt) of washer fluid
remains in the reservoir and the message
Washer fluid Level low, refill
the symbol, is shown in the driver dis-
play, then the supply of washer fluid to the
headlamps is switched off. This is to prioritise
cleaning the windscreen and the visibility
through it. The headlamps are only washed if
main or dipped beam is switched on.
Related information
Using the rain sensor (p. 179)
•
Wiper blades and washer fluid (p. 177)
•
Using the rain sensor's memory function
•
(p. 180)
Filling washer fluid (p. 652)
•
Set the wiper blades in service position
•
(p. 651)
* Option/accessory.
, together with