8
Maintenance
Maintenance of the filter and heat exchange element
WARNING
Cleaning the filter and heat exchange element involves dangerous work in high places, have a qualified
installer or qualified service person to do it.
Do not attempt it by yourself.
CAUTION
Do not push buttons with wet hands.
Doing so may result in electric shock.
Cleaning the filters
33-EN
When "
" is displayed on the detailed display, clean the filters.
• Clogged filters may cause lower performance.
– 17 –
Filter sign reset
"
" appears on the detailed display to tell the time for cleaning the filter.
When the filter check mark is displayed (filter check reset)
CAUTION
Cleaning remote controller
• Use a dry cloth to wipe the remote controller.
• Do not use a damp cloth on the remote controller.
• Do not use a chemically-treated duster for wiping or leave such materials on the
unit for long.
It may damage or fade the surface of the unit.
• Do not use benzene, thinner, polishing powder, or similar solvents for cleaning.
These may cause the plastic surface to crack or deform.
• When "
" is displayed, be sure to clean the filters and then do
a reset.
• If the Heat recovery ventilation units are operated while "
displayed, then "Filter check." is displayed. Push an operation
button while it is displayed or leave it for at least 5 seconds and
the display will disappear.
1
In "Menu", select "Filter sign reset", and push [
Fix]
2
Push [
Set/Fix]
" is
Set/
34-EN