Watchguard FLASHVIEW VSPV13M Quick Setup

1.3MP Network Camera with
Video Alert Notification
(Model No: VSPV13M)
Quick Setup
with iPhone / iPad
The VSPV13M is designed especially for iPhone
TM
Android mobile devices, and Internet Explorer
document covers setting up your camera with an iPhone or iPad.
Please visit our website for the full manual:
WatchguardAlarms.com.au
Package Contents
Camera
Adapter
®
, iPad
®
on PC. This
400Z
Intelligent Video
Surveillance
Quick Setup
with iPhone / iPad
AVN80X Network Camera
AVN80X is designed
especially for iPhone
and Android TM
devices, and Internet
®
Explorer on PC. Though it's
also accessible with other
web browsers on PC and
our free program (Video
Viewer), it is NOT
IP Cam
recommended to use them
with AVN80X to avoid any
compatibility issue.
80x_V1.0
Bracket
Quick Setup
RJ45 Network
Cable
1
Assemble & Install
1. Fasten the base of the bracket (the round one) to where the
camera will be installed.
The distance between your camera and the location you want
to monitor should be 3 ~ 4 metres.
2. Assemble the bracket and the camera. Then adjust the
viewing angle of the camera.
3. Connect your camera to power.
2
Before you begin
Before starting make sure you have checked the following:
Your camera is connected to your wireless router via a
network cable and the LAN status indicator( ) is always
on (not blinking).
®
and
iPhone / iPad
® , iPad ®
mobile
Install EagleEyes-Lite or EagleEyes-Plus from the App
Store.
In order to configure your VSPV13M camera to work with
your mobile device, you will need some basic knowledge
of IP networking. If you don't understand terminology like
port forwarding, IP addresses, modems or routers, we
suggest you employ the help of a qualified computer /
network technician.
LAN Port
Wireless
Network Router
Cable
(RJ45)
VSPV1.3M
WAN Port
Modem