Watchguard VSPV13M User Manual

1.3MP Network Camera with
Video Alert Notification
(Model No: VSPV13M)

Quick Setup

with iPhone / iPad
For operation manuals, please download from:
www.rhinoco.com.au/product/VSPV13M
2
Prerequisite
Before configuring network setup with iPhone / iPad, make
sure you have checked the followings:
(Recommended) Apply your own ADSL or cable
Internet service to simplify the network configurations.
Your camera is connected to your wireless router with
a RJ45 network cable, it's powered on, and its LAN
status indicator( ) is always on (not blinking).
iPhone / iPad
LAN Port
Network
Cable
(RJ45)
VSPV13M
You have installed our mobile program,
EagleEyes-Lite or EagleEyes-Plus, on your iPhone or
iPad.
If no, please download from "App Store".
Please note that EagleEyes HD for iPad doesn't support
network configuration. Please install EagleEyes-Lite or
EagleEyes Plus on your iPad instead.
VSPV13M is designed
® ®
especially for iPhone , iPad
TM
and Android mobile
devices, and Internet
®
Explorer on PC. Though it's
also accessible with other
web browsers on PC and
our free program (Video
Viewer), it is NOT
recommended to use them
with VSPV13M to avoid any
compatibility issue.
WAN Port
Wireless
Router
Modem

Package Content

+
Camera 6-pin terminal
+
Adapter
1
Assemble & Install
1. Fasten the base
of the bracket
(the round one)
to where the
camera is
installed.
The distance between your camera and the location you
want to monitor should be 3 ~ 4 meters.
2. Assemble the bracket and the camera, and adjust the
viewing angle of the camera.
3. Connect your camera to power.
(Optional) Your wireless router supports UPnP, and
this function is enabled.
You have checked the IP address used by your wireless
router as instructed below, and written them down.
You will need them later.
Connect your iPhone / iPad to the wireless router
with VSPV1.3M connected, and go to "Settings" 
"Wi-Fi". Select ">" near the selected wireless network
to enter the details.
Router: The IP address of your wireless router
400Z
Intelligent Video
Surveillance
Quick Setup
with iPhone / iPad
AVN80X Network Camera
AVN80X is designed
especially for iPhone ® , iPad ®
and Android TM mobile
devices, and Internet
Explorer ® on PC. Though it's
also accessible with other
web browsers on PC and
our free program (Video
Viewer), it is NOT
IP Cam
recommended to use them
with AVN80X to avoid any
compatibility issue.
80x_V1.0
Bracket Quick Setup
RJ45 Network Cable