Show Description; Instructions - Fnirsi IR40 Manual

2. Disadvantages: Refers to the weak reflectivity of the laser-irradiated area.(Like
black cardboard polished tiles.)The background lighting is strong and the working
temperature is <0°C or >45°C.At this time, an error effect of plus or minus 0.15
mm/m should be considered
【 3 】 Show Description
Measurement
reference indication
Laser
working state
Edge L3 icon
Current
measurement mode
Edge L2 icon
Edge L1 icon
Current
measurement data
【 4 】 Instructions
▲ Operation Precautions
1. The rangefinder cannot be moved during measurement, it needs to be placed
on a fixed support surface
2. Do not block the laser emission hole and the receiving lens during measurement
3. Based on physical principles, errors will occur when measuring on certain
surfaces, such as transparent, highly reflective, low reflective or porous surfaces.
Aiming targets can be placed on the above objects if necessary to improve
measurement accuracy
▲ Power On： Press and hold the "⑦ On/Measure key" for 3 seconds. When the
"FNIRSI" LOGO appears on the LCD display, the device is turned on
▲ Power Off： Press and hold "⑧ Off/Clear key" for 3 seconds.When the LCD
display turns off, the device is turned off.(When there is no operation after power
on: the laser will automatically turn off after 15 seconds, and it will
automatically turn off after 5 minutes)
Bluetooth icon
Power display
m
Edge L3
measurement data
Edge L2
m
measurement data
Edge L1
m
measurement data
m
Units of
measurement
02