Table of Contents
Advertisement
M
Manual Image Adjust
Displays the "Manual Image Adjust" menu. You can manually set a variety of
image quality adjustments.
Memory Recall
Returns the adjustments back to factory settings if the display is operating in
a factory preset timing mode listed in the "Specifications" of this manual.
NOTE:
• (Exception) This control does not affect changes made in the
"Language Select" or "Power Lock" setting.
• Memory Recall is the default as-shipped display configuration and
settings. Memory Recall is the setting in which the product qualifies
for ENERGY STAR®. Any changes to default as-shipped display
configuration and settings would change the energy consumption,
and may increase energy consumption beyond the limits required
for ENERGY STAR® qualification, as applicable. ENERGY STAR® is a
set of power-saving guidelines issued by the U.S. Environmental
Protection Agency (EPA). ENERGY STAR® is a joint program of the
U.S. Environmental Protection Agency
and the U.S. Department of Energy helping us all save
money and protect the environment through energy
efficient products and practices.
MPRT
Choose whether to activate Moving Picture Response Time (MPRT); default
setting is Off.
NOTE:
1. Make sure Input Timing detection is >100Hz to turn on 1ms Mode
from default.
2. If 1ms Mode is set to "On", when turning on FreeSync, MPRT will
automatically turn off.
3. When 1ms Mode is set to "On", the following functions will be grayed
out and disabled: Brightness, Advanced DCR, Eco Mode, sRGB,
Response Time, DDC/CI Brightness adjustment.
4. sRGB and 1ms Mode will disable each other.
5. The IC controls Moving Picture Response Time, so the overall
Brightness will be dark.
30
Advertisement
Table of Contents
