Table of Contents
Advertisement
T
roubleshooting guide
Symptom
Washer does not start
Washer will not spin
Door does not open
Wash cycle time
delayed
Dry problem
Error display
Possible Cause
• Electrical power cord may not be
plugged in or connection may be
loose.
• House fuse blown, circuit breaker
tripped,or a power outage has
occurred.
• Water supply tap is not turned on.
❋ Check that the door is firmly shut.
• Does not dry
The washer experienced a power
failure
Solution
Make sure plug fits tightly in wall
outlet.
Reset circuit breaker or replace fuse.
Do not increase fuse capacity.
If problem is a circuit overload, have
it corrected by a qualified electrician.
Turn on water supply tap.
Close the door and press the
Start/Pause button. After pressing the
Start/Pause button, it may take a few
moments before the clothes washer
begins to spin.
The door must lock before spin can
be achieved.
Once started, the door can not be
opened for safety reasons.
Wait one or two minutes before
opening the door to give the electric
locking mechanism time to release.
The washing time may vary by the
amount of laundry, water
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds removing program works, the
wash time shall be increased.
Do not overload.
Check that the washer is draining
properly to extract adequate water
from the load.
Clothes load is too small to tumble
property. Add a few towels.
When the power is recovered, press
the Start/Pause button after pressing
the power button. It will restart from
the beginning step of cycle (Wash,
Rinse, Spin)
29
Advertisement
Table of Contents
