Samsung AC052BN6PKG User Manual page 19

Problem
The wireless remote
control does not
operate.
The wired remote
control does not
operate.
The air conditioner is
not turned on or off
immediately with
the wired remote
control.
The Timed on/off
function does not
operate.
The indoor unit
display blinks
continuously.
I want to get cooler
air.
• Check whether the batteries are discharged. Replace the batteries with new
ones.
• Make sure that nothing is blocking the remote control sensor.
• Check whether any strong lighting sources are near the air conditioner.
Strong light which comes from fluorescent bulbs or neon signs may
interfere with the remote control.
• Check whether the
remote control display. In this case, turn off both the air conditioner and the
auxiliary power switch, and then contact a service centre.
• Check whether the wired remote control is set for group control. In this case,
the air conditioners connected to the wired remote control are turned on or
off sequentially. This operation takes up to 32 seconds.
• Check whether you pressed the
setting the on/off time. Set the on/off time.
• Turn on the air conditioner again by pressing the
• Turn off and then turn on the auxiliary power switch, and then turn on the
conditioner.
• If the indoor unit display is still blinking, contact a service centre.
• Operate the air conditioner with a electric fan to save energy and enhance
the cooling efficiency.
Solution
indicator is displayed at the bottom right of the
(SET) button on the remote control after
(Power) button.
English 19