Table of Contents
Advertisement
Advanced Features
Switching between Anynet+ Devices
1.
Open the
Tools
menu using your remote, and then select
2.
Select a device, and then wait until the switch to the selected device is completed.
The menu appears only when you set
"
Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while
"
switching is in progress.
If you have selected an Anynet+ device using the
"
to switch to an Anynet+ device.
Anynet+
Anynet+ (HDMI-CEC)
to
On
Source
function, you cannot use the Anynet+ function. Make sure
English - 71
(HDMI-CEC).
in the
System
menu.
Advertisement
Table of Contents
