Basic Features
Calibrating the Screen Display
Auto Adjustment
MENU
→
Picture
→
Auto Adjustment
Automatically adjusts the picture's frequency, position, and fine tune settings in the
Available only when you connect your PC to the product with a D-Sub cable.
"
PC Screen Adjustment
MENU
→
Picture
→
PC Screen Adjustment
Available in
PC
mode only.
"
●
Coarse
/ Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, use the
function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been
reduced, re-adjust the picture so that it is aligned with the centre of screen.
●
Position: Adjust the PC's screen position using your remote if it is not centre or does not fit the product screen.
●
Image
Reset: Resets the image to the default settings.
Using Your Product as a Computer (PC) Display
Entering the Video Settings (Based on Windows 7, 8, 10)
For your product to work properly as a computer display, you must enter the correct video settings.
Depending on your version of Windows and your video card, the procedure on your PC will probably differ slightly
"
from the procedure presented here.
However, the same basic information will apply in most cases. (If not, contact your computer manufacturer or
"
Samsung Dealer.)
1.
Click "Control Panel" on the Windows start menu.
2.
Click "Appearance and Themes" in the "Control Panel" window. A display dialog box appears.
3.
Click "Display". Another display dialog box appears.
4.
Click the "Settings" tab on the display dialog box.
— On the Settings tab, set the correct resolution (screen size). The optimal resolution for this product is 1920 x
1080.
— If a vertical-frequency option exists on your display settings dialog box, select "60" or "60 Hz". Otherwise, just
click "OK" and exit the dialog box.
English - 34
PC
mode.
Coarse