Table of Contents
Advertisement
Getting Started
If the product is installed in a
location where the operating
conditions vary considerably,
a serious quality problem may
occur due to the surrounding
environment. In this case, install
the product only after consulting
one of our service engineers about
the matter.
●
Cleaning Related
Warning
Before cleaning the product,
unplug the power cord.
●
Caution
Avoid spraying cleansing agent
directly onto the product.
●
Places exposed to microscopic
dust, chemicals, too high or low
temperature, high humidity,
airports or stations where the
product is continuously used.
Otherwise, it may result in
electric shock or fire.
This may result in
discolouration or cracking of
the exterior of the product or
the panel coming off.
English - 7
When cleaning the product, do
not spray water directly over the
product parts.
●
Make sure that water does not
enter the product.
●
Otherwise, it may result in fire,
electric shock or a problem
with the product.
When cleaning the product,
disconnect the power cord and
clean the product with the cleaning
cloth.
●
Avoid using chemicals such as
wax, benzene, alcohol, thinner,
mosquito coil, fragrance,
lubrication or cleansing agent
when cleaning the product.
This may result in the exterior
being deformed or the print
being removed.
Advertisement
Table of Contents
