Technical Data - DeWalt DCF85M Original Instructions Manual

EnGLIsh
BRUSHLESS CORDLESS COMPACT IMPACT DRIVER
DCF85M
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
Power output
No-load speed
Mode 1
Mode 2
Mode 3
Impact rate
Max torque
Tool holder
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841-2-2:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841EN IEC 62841-2-6 and may be used to compare
one tool with another. It may be used for a preliminary assessment
of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
24
EC‑Declaration of Conformity
Machinery Directive
WALT one of the
e
Brushless Cordless Compact Impact Driver
DCF85M
DCF85M
V 18
D
DC
1
Data are in compliance with:
2006/42/EC, EN 62841-1:2015 + A11:2022; EN 62841-2-2:2014.
Li-Ion
These products also comply with Directive 2014/30/EU and
W 475
2011/65/EU.For more information, please contact D
rpm
following address or refer to the back of the manual.
0-1000
The undersigned is responsible for compilation of the technical
0-2800
file and makes this declaration on behalf of D
0-3250
ipm 0-3800
Nm 205
mm 6.35
Markus Rompel
kg 1.0
Vice-President Engineering, PTE-Europe
D
65510, Idstein, Germany
dB(A) 91 8.12.2022
dB(A) 99
dB(A) 3
m/s² 18.5
m/s² 1.7
BRUSHLESS CORDLESS COMPACT IMPACT DRIVER
D
Data are in compliance with:
EN 62841-1:2015+A11: 2022 and EN 62841-2-2:2014.
These products conform to the following UK Regulations
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
WALT declares that these products described under Technical
e
WALT, Richard-Klinger-Straße 11,
e
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
DCF85M
WALT declares that these products described under Technical
e
WALT at the
e
WALT.
e
WALT at the following
e