Vehicle And Driver Tools; Break Planning; Taking A Suggested Break; Starting The Break Timer - Garmin DEZL LGV700 Owner's Manual

Hide thumbs Also See for DEZL LGV700:

Owner's manual (30 pages)

Owner's manual (60 pages)

Table Of Contents

Table of Contents

Break planning

This device by itself is NOT an approved substitute for logbook recording requirements under US Federal Motor

Carrier Safety Administration (FMCSA) regulations. Drivers should comply with all applicable hours-of-service

requirements. When integrated with a Garmin eLog compliant Electronic Logging Device (ELD), this device

enables a motor carrier to comply with hours of service logging and break requirements. For more information,

or to purchase a Garmin eLog device, go to garmin.com/elog.

When the break planning feature is enabled, the device notifies you one hour before suggested break times and

drive hour limits and suggests break locations on your route. You can use this feature to keep track of your

working hours, which may help you comply with safety regulations.

NOTE: break planning features are not available when using the car vehicle profile.

Taking a suggested break

When it is time for a break, the device notifies you and displays suggested break location POIs along your route.

Select a POI from the list of suggested break locations.

The device adds the break location as the next destination on your route.

Starting the break timer

The break timer starts automatically when the vehicle is moving at least 5 mph (8 kph) for 30 seconds. You can

start the timer manually at any time.

1 From the map, select > Break Planner.

2 Select Start Timer.

Pausing and resetting the break timer

The break timer pauses automatically when the vehicle stops for three minutes or longer. You can pause the

timer manually for brief stops, such as parking or stopping at motorway services. At the end of your drive, you

can manually reset the timer.

1 Select Stop Timer.

2 Select an option:

• To pause the timer, select Pause.

• To stop and reset the timer, select Reset.

Adjusting drive hours

You can adjust your total hours driven to more closely match your hours of service records.

1 While using the break planner feature, select Total Hours Driven.

2 Enter the total hours driven.

3 Select Save.

Adjusting the daily driving limit

You can adjust the daily driving limit to correspond with legal requirements in your area.

NOTE: this feature is not available in all areas.

1 While using the break planner feature, select Daily Hours Driven.

2 Select the daily driving limit for your area.

3 Select Save.