Advertisement
INDOOR UNIT DISPLAY
1
1 ECO (White)
2 Wi-Fi access (White)
3 Hi-Power (White)
4 Timer (White)
5 Operation (White)
• Display brightness can be adjusted, follow procedure on ".
Require Wireless LAN connecting adapter which available as accessory.
PREPARATION BEFORE USE
2
Preparing Filters
1. Open the air inlet grille and remove the air fi lters.
2. Attach the fi lters. (see detail in the accessory sheet).
Loading Batteries (when use wireless operation.)
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type) following
the (+) and (–) positions.
Remote Control Reset
1. Remove the batteries.
2. Press
.
3. Insert the batteries.
AIR FLOW DIRECTION
3
Press
: Move the louver in
1
the desired vertical direction.
Press
: Swing the air
2
automatically and press again to stop.
For horizontal direction, adjust
3
manually.
Note:
• Do not move the louver manually by others.
• The louver may automation positioning by some operation mode.
REMOTE CONTROL
4
1 Infrared signal emitter
2 Start/Stop button
3 Mode select button (MODE)
4 Temperature button (TEMP)
5 Fan speed button (FAN)
6 Swing louver button (SWING)
7 Set louver button (FIX)
8 Off timer button (OFF)
9 High power button (Hi-POWER)
! ECO/SILENT button (ECO/SILENT)
" Clear button (CLEAR)
# Check button (CHECK)
AUTOMATIC OPERATION
5
To automatically select cooling, heating, or fan only operation
1. Press
: Select A.
2. Press
: Set the desired temperature.
Min. 17°C, Max. 30°C
3. Press
: Select AUTO, LOW , LOW+
MED+
, HIGH
, or QUIET
1
Hi POWER
ECO
MODE
SILENT
OFF
3
2
7
9
8
#
, MED
,
.
COOLING / HEATING / FAN ONLY
6
OPERATION
1. Press
: Select Cool
2. Press
: Set the desired temperature.
Cooling and Heating : Min. 17°C, Max. 30°C
Fan Only : No temperature indication
3. Press
: Select AUTO, LOW , LOW+
MED+
, HIGH
DRY OPERATION
7
For dehumidifi cation, a moderate cooling performance is controlled automatically.
1. Press
2. Press
: Set the desired temperature.
Min. 17°C, Max. 30°C
Note: Dry mode fan speed is set to Auto only.
Hi-POWER OPERATION
8
To automatically control room temperature and airfl ow for faster cooling or
heating operation (Except in DRY and FAN ONLY mode)
Press
: Start and stop the operation.
Note: Hi-POWER operation symbol will appear on remote control display.
ECO / SILENT OPERATION
9
ECO OPERATION
To automatically control room temperature to save energy (Except in DRY and
FAN ONLY mode)
Note: Cooling operation; the set temperature will increase automatically 1 degree/
hour for 2 hours (maximum 2 degree increase). For Heating operation the
set temperature will decrease.
SILENT OPERATION
To reduce outdoor sound level during operation (Except in DRY and FAN ONLY
mode)
Note: Though operating silently, the Heating or Cooling capacity is still prioritized
to ensure having suffi cient comfort inside the room.
ECO and SILENT operation setting
Press
: Start and stop the operation.
➝
NORMAL
Note: ECO and SILENT operation symbol will appear on remote control display.
TIMER OPERATION
10
4
Set the timer when the air conditioner is operating.
6
5
Press
for enter OFF timer setting.
1
!
"
2
Press
for select desired OFF timer. (0.5 - 12 hrs)
3
Press
for set OFF timer.
4
Press
again for cancel OFF timer.
Note: TIMER OPERATION symbol will appear on remote control display.
, Heat
, or Fan only
, MED
, or QUIET
.
: Select Dry
.
➝
ECO
SILENT
Setting the OFF timer
.
,
Advertisement
