Table of Contents
Advertisement
Getting started
Simple steps to start
1. Press
Power to turn the dryer on.
2. Make sure the lint filter is installed.
3. Load the dryer and close the door.
4. Turn the Cycle Selector to select a cycle.
5. Change the cycle settings (
6. Select necessary settings and options to your preference. (
Damp Alert).
7. Press
Start/Pause. The dryer indicator lights up, and the estimated cycle time appears on the display.
NOTE
• When you turn on the power, the Check Filter
normal.
• The number of available settings and options differs with the cycle.
To change the cycle during operation
1. Press
Start/Pause to stop operation.
2. Select a different cycle.
3. Press
Start/Pause to start new cycle.
Sorting and loading
• Put only one wash load in the dryer at a time.
• Avoid mixing heavy and lightweight items together.
• To increase drying efficiency when drying one or two items, add a dry towel to the load.
• For best results, untangle items before inserting into the dryer.
• Overloading restricts the tumbling process, resulting in uneven drying and wrinkling.
• Unless recommended on the care label, avoid drying woollens or fibreglass items.
• Avoid drying unwashed items.
• Do not dry items soiled with oil, alcohol, gasoline, etc.
B-PJT_DV5000B_WEB_English.indd 31
Dry Level, and
Time) as necessary.
indicator blinks for few seconds and then turns off. It is
Wrinkle Prevent,
Drum Light, and/or
English 31
2022/7/30 11:07:11
Advertisement
Table of Contents
