Seal the joints.
3.
Connecting to the power supply
Insert the mains plug into the protective contact
1.
socket.
If a fixed connection is required, follow the instruc-
2.
tions in the section
→ "Instructions for the electrical connection",
Page 12.
Removing the appliance
Disconnect the appliance from the power supply.
1.
Loosen the exhaust pipe.
2.
Remove the grease filters.
3.
To avoid causing damage, do not bend the grease
filters.
Remove the cover.
4.
Loosen the screw connection with the fitted unit.
5.
Remove the appliance.
6.
Remove the angle bracket.
7.
Installation instructions en
17