en Installation instructions
Screw on the angle bracket.
6.
Installing the appliance
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
Wear protective gloves.
▶
Remove the protective film from the rear.
1.
Once the appliance is installed, fully remove the
‒
protective film.
Slide the retainers into the rear of the appliance
2.
and screw them in tightly
Hook on the appliance.
3.
Align the appliance horizontally using threaded pins.
4.
16
.
Secure the appliance to the unit.
5.
Secure the cover to the bottom of the appliance.
6.
Secure the appliance to the wall.
7.
Secure the cover in place.
8.
Fit the grease filters.
9.
To avoid causing damage, do not bend the grease
filters.
Establishing the exhaust air connection
You can install the exhaust pipe on the air-pipe con-
nector on the upper side of the appliance.
Secure the exhaust pipe to the air pipe connector.
1.
Establish the connection to the exhaust air opening.
2.