KTM 350 EXC-F 2022 Setup Instructions page 25

3.7 Installing the shock absorber
3.8 Installing the fork legs
Main work
–
Push splash protector
absorber. Mount and tighten screw
Guideline
Screw, top
shock absorber
–
Mount and tighten screw
Guideline
A01014-11
Screw, bottom
shock absorber
Info
The heim joint for the shock absorber on the link fork
is Teflon coated. It must not be lubricated with grease,
nor with any other lubricants. Lubricants dissolve the
Teflon coating, thereby drastically reducing the service
life.
Finishing work
–
Remove the motorcycle from the lift stand. (
Main work
–
Position the fork legs.
Bleeder screws
Info
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
be flush with the upper edge of the upper triple clamp.
402556-10
(All standard models)
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Tighten screws
Guideline
Screw, bottom
V01756-11
triple clamp
1
to the side and position the shock
2
.
M12 80 Nm (59 lbf ft)
Loctite
3
.
M12 80 Nm (59 lbf ft)
Loctite
p. 20)
1
are positioned toward the front.
2
.
M8 20 Nm
(14.8 lbf ft)
3
.
M8 15 Nm
(11.1 lbf ft)
WORK 3
® 2701™
® 2701™
23