Hardware Connection - Aviosys IP Power 9855 PRO User Manual

3.3 Hardware Connection

Before hardware connection, please make sure that there is no more than 2 net work
cards( include dynamic network card ). If there are more than two network card in your
PC. You may not get the IP address of 9855 PRO
Please connect the 9855 PRO under your router or to the PC directly.
The default IP of 9855 PRO is 192.168.1.168 .
To log in to the 9855 PRO directly, please make sure the IP address of you PC is also
the same segment as the 9855 PRO, like 192.168.1.XXX ( XXX = 1~254) or you
may not log in the 9855 PRO webpage as different segment .
User can change the FIX IP mode to DHCP mode through our IP search tool " IPEDIT
" or through the 9855 PRO webpage as log in . As change to DHCP mode, 9855PRO
will get the IP address from user`s router.
The way to use IPEDIT to change 9855 PRO as DHCP is as following :
Step 1 : Select the 9855 PRO IP show in the IPEDIT. It show FIX IP below MAC address
section.
Step 2: Select DHCP area and click " Submit " then it will ask to type the username and
password.
Please fill root & 12345678 and click OK / setup.
Step 3: Wait for one minutes for 9855 PRO reboot up and click the rescan button in IPEDIT
to get the new IP address which is assigned from your DHCP router. Then you can
also find the 9855 PRO show DHCP in IPEDIT tool.
- 11 -