RAMBO PURSUIT R750P-FF-GY Manual page 5

Table of Contents

Advertisement

You must ensure that you understand the safe operation of this bike and follow all traffic, bike laws and
regulations in the area in which the bike is being operated. These may include rules regarding helmets,
reflectors, and lights. A few important general rules for riding include but are not limited to:
- Wear a helmet that meets ASTM or CPSC safety testing requirements.
- Have reflectors and lights installed on your bike
- Use proper hand signals
- Avoid loose clothing
- Ride on the correct side of the road with flow of traffic
- Always wear brightly colored and reflective clothing
- Ride single file if riding with others
- Obey all traffic laws and regulations
- Watch for parked car doors opening unexpectedly
- Watch for pedestrians stepping out, pets and children playing near roadways
- Never carry a passenger
- Never ride with earbuds or headphones
- Always obey traffic signals
- Use caution when crossing railroad tracks and carefully cross at a 90 degree angle
- Mount a horn or bell on to your bike to signal others of your approach
- Before riding fast or in more difficult conditions, try riding at slower speeds in a flat, open area to test the
function and performance features of your bike.
- Consult your local bike shop if you have specific needs regarding the parts and functionality of your bike.
Many areas offer cycling courses or classes which can be found online or through your local bike shops.
Wet Weather Conditions
Use extra caution when riding in wet weather. Your brake stopping power will be diminished in wet conditions
no matter what type of brake system you have; all are affected by wet weather. In order to ensure you can
stop safely in wet conditions, ride more cautiously and slowly and brake earlier than you would in normal road
and weather conditions. Never ride in storms with high winds and lightning.
Check the Lights and Reflectors
Make sure the reflectors are mounted in the proper position and they do not have any cracks or visible
damage. All lighting should be inspected to be sure they have fresh batteries and work properly.
Check Frame, Fork, and Components
5

Advertisement

Table of Contents
loading

Table of Contents