RAMBO PURSUIT R750P-FF-GY Manual page 16

Be sure the seat height is set properly; the rider should be able to put both feet on the ground while fully
seated. The seat post has a minimum insertion point, be sure not to extend the seat beyond this line.
When using the bike for the first time, be sure to practice in a safe environment with no obstacles or hazards.
ALWAYS WEAR AN ASTM OR CPSC CERTIFIED HELMET AND PROTECTIVE ATTIRE INCLUDING SHOES
THROTTLE OPERATION
Your bike is equipped with a thumb throttle; the throttle can be used from a complete stop all the way to the
top speed and at any time. The thumb throttle is activated when the pedal assist level is on level 1-5. The
throttle will not work on level 0.
SHIFTING
Your bike is equipped with a 7-speed gear system, gear 1 is the largest gear and gear 7 is the smallest gear.
Gear 1 will give you the most torque and lowest speed. While gear 7 will give you the lowest torque and most
speed.
LCD INFORMATION
Below is a picture of the LCD on your bike, note that when the pedal assist level is on 0 there is no power from
the motor for both pedaling and for using the thumb throttle. Once the assist level is set above 0 the motor
will have power and pedal assist and the thumb throttle will be activated. Note that once you come to a
complete stop the LCD will reset the pedal assist level to 0 after 15 seconds, this is a built-in feature to ensure
safety.
16