Cleaning And Maintenance - Remington STYLE F4 Series Use & Care Manual

CLEANING & MAINTENANCE
The shaver is a wet/dry appliance. The shaver may be cleaned under warm
water.
Note: When cleaning your shaver, make sure the shaver is turned off and
disconnected from the power cord.
Caution:
When cleaning the external surfaces of the shaver, use a damp cloth. Do
not use strong detergents or other chemicals.
To dry, wipe the surface of the shaver with a dry towel. Do not use a hair
dryer or heater to dry the shaver.
Note: Lubricate cutters after rinsing with Remington Shaver Saver (SP4).
Cleaning Your Shaver
Note: We recommend following these steps after each use.
1.
Remove the foil assembly by pressing the release buttons on both
sides of the head and lifting the foil assembly upwards to remove
from the hair pocket. (Diagram I)
2.
Tap out excess hair shavings.
3.
Rinse the head of the assembly under running water. (Diagram J)
4.
Replace the head assembly by placing the assembly on top of the hair
pocket, press down and click into place. (Diagram K)
Lubricate
Remington Shaver Saver (SP-4) lubricates, cleans and protects your
®
shaver's foil and cutter assembly. The lubricant helps remove hair clippings
while reducing wear. Spray on the foil and cutters after each shave to keep
your shaver operating at peak performance.
12