Norelco 7865XL User Manual page 19

7865DFU.qxd 8/2/04
C
C
C
C
05:41 PM Page 19
Press the razor head release button, open
2
and lift off the razor head assembly.
3 Turn the wheel counterclockwise and
remove the retaining frame.
Remove and clean one set of cutters and
4
combs at a time.
Separate the cutter from the comb and
5
rinse clean under hot water.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
Replace the set back into the Razor Head
6
Assembly in such a way that the sides with
the little holes point to the middle of the
shaving unit.
The set will only fit into the Razor Head
Assembly if the 'wings' are between the brackets.
Make sure that the two pointy edges of the head
fit exactly into the recesses.
Repeat the process for the other two sets
7
of cutters and combs.
(Black plate)
ENGLISH
19