End Of Programme - Beko WMB 81231 PTMLC Manual

programme will be canceled. End /
Cancel light will flash continuously to
notify that the programme has been
canceled.
Pump function is activated for 1-2
minutes regardless of the programme
step, and whether there is water in the
machine or not. After this period, your
machine will be ready to start with the
first step of the new programme.
C Depending on the step where the
programme was canceled in, you
may have to put detergent and
softener again for the programme
you have selected anew.

End of programme

"End" appears on the display at the end
of the programme.
1. Wait until the loading door light
illuminates steadily.
2. Press On / Off button to switch off
the machine.
3. Take out your laundry and close the
loading door. Your machine is ready
for the next washing cycle.
25
EN