Download Print this page
Hide thumbs Also See for YP-MT6:

Advertisement

Quick Links

Disconnecting the USB cable
After completing the file transfer, you must disconnect the cable in the following way:
1
Double-click on the green arrow in the
taskbar on the bottom right of the window.
2
When the [Stop a Hardware device] message appears,
press the [OK] button and disconnect the USB cable.
k
4
AH68-00000A (Rev 0.0)
YP-MT6 Quick Guide
Location of Controls
Display
Loop Repeating Button
Recording Button
Microphone
USB Cable
Connection Port
Hold Switch
ENC Jack
Turning Power On and Off
Power On : Press the
button to turn on the power.
Power Off : Press and hold the
button to turn off the power.
Pausing Music
Press the
button to pause playback.
If no buttons are pressed within 10 seconds(changes depending on settings),
the yepp automatically powers off.
While in Pause mode, briefly press
again to resume playback.
Neck strap Hook
MENU, Navigation button/
Move to Track/Speed Search/
Volume Button
Play/Pause Button
Battery Cover
Earphone Jack
Playing Music
Press the
button.
Playback starts.
1

Advertisement

loading

Summary of Contents for Samsung YP-MT6

  • Page 1 YP-MT6 Quick Guide Disconnecting the USB cable Location of Controls After completing the file transfer, you must disconnect the cable in the following way: Neck strap Hook Display MENU, Navigation button/ Move to Track/Speed Search/ Double-click on the green arrow in the Volume Button taskbar on the bottom right of the window.
  • Page 2 You may not see the display screen during installation. Go to the device manager to check that installation has been successfully completed. Upon installation of the USB driver "Samsung yepp YP-MT6 USB Device" will appear in the [System Properties] [Device Manager].