Capture Mode; Burst - Hitachi HDC-651E Instruction Manual

CAPTURE MODE

Burst

This mode is used for continuous shooting. 3 pictures are taken continuously once the shutter release button
is pressed. Secure the camera to a tripod or place it on a stable surface.
1. Rotate the mode dial to
2. Press the power switch to turn on the power.
3. Press the four-way controller ( /
[Burst]. You can also change the setting using four-way controller
( ).
4. Press the button to confirm the setting. The
displayed on the monitor screen.
5. Press the shutter release button halfway to lock the focus.
6. Press the shutter release button to capture a sequence of images.
In Burst mode, the flash mode will be set to Flash Off automatically.
, , , , , or
) and use ( ) to select
.
indicator is
Capture Mode Captu pture Mod e Mode
Burst Burst Bu
OK : OK : OK :
EN-29