Toyota Matrix 2008 Manual page 207

Tire related term
Innerliner separation
Intended outboard sidewall
Light truck (LT) tire
Load rating
Maximum load rating
Maximum permissible inflation
pressure
Measuring rim
Open splice
Outer diameter
Overall width
'08 MATRIX_U (L/O 0706)
the parting of the innerliner from cord material in the carcass
(A) the sidewall that contains a whitewall, bears white lettering or bears
manufacturer, brand, and/or model name molding that is higher or
deeper than the same molding on the other sidewall of the tire, or
(B) the outward facing sidewall of an asymmetrical tire that has a particular
side that must always face outward when mounted on a vehicle
a tire designated by its manufacturer as primarily intended for use on lightweight
trucks or multipurpose passenger vehicles
the maximum load that a tire is rated to carry for a given inflation pressure
the load rating for a tire at the maximum permissible inflation pressure for that
tire
the maximum cold inflation pressure to which a tire may be inflated
the rim on which a tire is fitted for physical dimension requirements
any parting at any junction of tread, sidewall, or innerliner that extends to cord
material
the overall diameter of an inflated new tire
the linear distance between the exteriors of the sidewalls of an inflated tire,
including elevations due to labeling, decorations, or protective bands or ribs
Meaning
2008 COROLLA MATRIX from Aug. '07 Prod. (OM12B26U)
207