Outside Temperature Display - Toyota Matrix 2008 Manual

3. Trip meter reset knob—Resets the two
trip meters to zero, and also change
the meter display.
To change the meter display, quickly
push and release the knob. The meter
display changes in the order from the
odometer to trip meter A to trip meter
B, then back to the odometer each
time you push.
To reset the trip meter A to zero, dis-
play the meter A reading, then push
and hold the knob until the meter is
set to zero. The same process can be
applied for resetting the trip meter B.
104
'08 MATRIX_U (L/O 0706)

Outside temperature display

The displayed temperature ranges from
−30_C (−22_F) up to 50_C (122_F).
The key must be in the "ON" position.
If an abnormality exists in the connection
of the outside air temperature sensor, "−−"
will appear on the display. If "−−" appears
on the display, contact your Toyota dealer.
There may be a case that "−−" appears
momentarily when the ignition is quickly
turned to "ON". It is normal if it goes out
soon.
2008 COROLLA MATRIX from Aug. '07 Prod. (OM12B26U)