Samsung DV9 BB9445 Series User Manual page 47

CAUTION
• Clean the lint filter after each load. Otherwise, the drying performance may decrease.
• If the filter surface is wet, allow it to completely dry before use.
- Inserting the filter while it is wet can cause mold and/or odor to form and/or result in less drying.
• When cleaning or removing the lint filter, do not shake or tap on the filter. Doing so can damage the
filter.
• Opening the outer and inner filters carelessly and with excessive force can damage the filters.
Heat exchanger
When it is time to clean the heat exchanger, the dryer will alert you by displaying the "Clean heat
exchanger" message.
A dirty heat exchanger will hinder the product's performance and should be cleaned regularly.
NOTE
• Water droplets can form around the heat exchanger due to condensation caused by a temperature
difference. This is normal and is not a sign of a leak.
• If you are not planning on using the dryer for a long period of time, open the heat exchanger cover and
ventilate.
B-PJT_DV9400B_SimpleUX_WEB_English.indd 47
A
5. Put the inner filter into the outer filter, and then
reinsert the lint filter into the original position.
1. Gently press the top part of the outer cover (A) to
open.
English 47
2022/7/14 15:08:22