Notes To Use Wireless - LG SPJ4B-W Owner's Manual

32 Troubleshooting
PROBLEM
The unit does
not connect with
Bluetooth device
When you feel the
output sound of the
unit is low.

NOTES to use wireless

PROBLEM
4
This device may have
wireless interference.
Bluetooth device may
malfunction or make
noise in the following
cases.
y Turn off the Bluetooth connection lock function. (Refer to the page 27.)
Check the details below and adjust the unit according to them.
y With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on
TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
y With the sound bar connected with Player, change the AUDIO DIGITAL OUT
setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
y Change Audio DRC setting on connected device setup menu to [OFF] state.
y Make sure Night Mode is not On. Turn [OFF] Night Mode.
y Wireless may not operate normally in weak signal area.
y Please install the device close enough to wireless subwoofer.
y Do not install the device on metal furniture for optimum performance.
y When any part of your body contact the transceiver of the Bluetooth device or
sound bar.
y When there is an obstacle or wall or the device is installed in a secluded spot.
y When there is a device(a wireless LAN, a medical equipment or a microwave) using
same frequency, make the distance between the products as far away as possible
each other.
y When to connecting the device to the Bluetooth device, make the distance
between the products as close as possible each other.
y When the device gets too far from the Bluetooth device, the connection is
disconnected and also malfunction may occur.
CAUSE & CORRECTION
CAUSE & CORRECTION