System Q Door Knox VDP304 Quick Start Manual

VDP304 - Quick Start Guide
Two door cameras and two door locks can be connected to the main monitor.
*The menu structure in the VDP304 does not match the latest VDP207 and VDP210 monitors, but they can be used
in conjunction with each other.
DoorKnox Monitors from serial numbers VDP207 (HCA01001) & VDP210 (HCB00401) can be used along side the
VDP304.
User Information
·
Do not expose to moisture or high humidity conditions. This product is rated for internal use only.
·
Take care when transporting, storing and installing the monitor
·
Always use and conform to current standards to install and use these. The signal cables should be kept way from
high voltage equipment. Damage to units by lightning or mains voltage surges is not covered under the product
warranty.(BS EN 62676-1-1) (BS EN 62676-4) (BS8418)
·
There are no user serviceable parts in the monitor and opening or attempting to repair the product will void the
warranty.
·
Do not touch the connections with wet hands.
·
Wipe dirt away with a damp micro-fibrecloth.
·
Do not install or use the monitor if the cables, casing, or the power supply is damaged.
Connections
Document ref: xVDP304
The VDP304 has a stylish brushed aluminium &
gloss black finish and quality build the DoorKnox
is ideal for retail and commercial projects.
The menu interface has an updated modern
design, showing coloured icons, making it
easier to remember which menu option does
what.*
Our touch button monitor provides control of the
door entry camera and is available in a 4"
DoorKnox.com
Video Door Entry Monitor - 4 Inch AHD Ready
DoorKnox is a registered trademark of System Q Ltd
Full Instruction Manual
www.systemq.com/PDF/
manual/xVDP304.pdf
© 2023 System Q Ltd
1