Advertisement
Table of Contents
PhoneSEE WiFI DoorKnox Box
DoorKnox is a registered trademark of System Q Ltd
VDP300 - Quick Start Guide
www.systemq.com/PDF
/manual/xVDP300.pdf
The VDP300 PhoneSEE WiFi DoorKnox box is used to integrate DoorKnox cameras and monitors for
remote viewing and door relay control via the "Tuya Smart" application.
Connections
The VDP300 is installed between DoorKnox cameras and DoorKnox monitors to intercept the images to
stream and connect with the Tuya Smart app via the WiFi or via a Ethernet network cable connected to
a router. Ensure the VDP300 is setup close to the router or access point for best WiFi performance
Power the VDP300 from 12V DC (via the PSU provided)
Mounting
The VDP300 Hub can be mounted using the screws provided and the mounting holes on the rear.
Copyright 2021 System Q Ltd
Quick Start Guide - qVDP300
1
Advertisement
Table of Contents
Related Manuals for System Q VDP300
Summary of Contents for System Q VDP300
- Page 1 Tuya Smart app via the WiFi or via a Ethernet network cable connected to a router. Ensure the VDP300 is setup close to the router or access point for best WiFi performance Power the VDP300 from 12V DC (via the PSU provided) Mounting The VDP300 Hub can be mounted using the screws provided and the mounting holes on the rear.
- Page 2 All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. Whilst every effort is made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible for any losses, no matter how they arise, from errors or omissions in these instructions, or the performance or non-performance of the equipment refered to.
Need help?
Do you have a question about the VDP300 and is the answer not in the manual?
Questions and answers