Advertisement
OPERATION INSTRUCTIONS
IMPORTANT!
Your heater is equipped with a
polarized alternating current line plug
(a plug having one blade wider than
the other). This plug will fit into the
power outlet only one way. This is a
safety feature. If you are unable to
insert the plug fully into the outlet, try
reversing the plug. If the plug still fails
to fit, contact your electrician to
replace your outlet. DO NOT defeat
the safety purpose of the polarized
plug.
A
Power and Setting Control
Thermostat Control
C
• Place the heater on a firm level surface that is free of obstructions, and at least 3 ft. (0.9m) away
from all walls and other objects such as furniture, curtains, plants or combustible material.
• With the Power and Setting Control "A" in the "OFF" position, plug the heater into a grounded
120V outlet.
• Turn the heater "ON" by turning the Power and Setting Control "A" clockwise to the desired
power setting (LOW, HIGH, LOW & OSC or HIGH & OSC). The Power Indicator Light "B" will
illuminate. The power settings operate as follows:
LOW: The Fan and heating elements operate at LOW setting operates at 900W.
HIGH: The Fan and heating elements operate at HIGHT setting operates at 1500W.
LOW&OSC: The Fan and heating elements operate at LOW setting with oscillation.
HIGH&OSC: The Fan and heating elements operate at HIGHT setting with oscillation.
• Turn the Thermostat Control "C" to the desired setting between "MIN" and "MAX."
This heater includes a safety tip-over switch, which will shut the heater off in case
it is tipped over. If at any time, the heater does tip over, please put the heater back in
the upright position. The heater will resume its normal operation.
C
Control Panel Functions
B
2
Power Indicator Light
A
B
D
Advertisement
