Mitsubishi Electric PLFY-P20VBM-E.UK Technical & Service Manual page 36

10-1-3. How to perform the up/down operation using wired remote controller <PAR-30MAA><PAR-31MAA>
Select "Maintenance" from the Main menu, and press the
1
Select "Auto descending panel" with the F1 or F2 button, and press the
button.
Note:
When using the auto descending panel, always set the "Address" and "Unit No."
with "Service" – "Function setting".
Move the cursor to "Ref. address", "Unit No." or "Operation" with the F1
2
button to select.
Select the refrigerant address and the unit number for the units to lower the
panel, with the F2 or F3 button, and press the
• Ref. address: Refrigerant address
• Unit No.: 1, 2, 3, 4, All
• Operation: Down / Up
Press the F4 button to confirm the unit.
<Confirmation of target unit>
If the unit being set is unknown, make the setting and then press the F4 but-
ton to confirm.
The air conditioner which is blowing downward is the target air conditioner.
Navigating through the screens
• To go back to the Main menu ..................
• To return to the previous screen ...............
OCH413E
button.
button.
button
button
36
Maintenance menu
Auto descending panel
Manual vane angle
Main menu:
Cursor
F1 F2 F3 F4
Auto descending panel
Ref. address
Unit No. All
Operation Down / Up
Keep clear, panel descending.
Press Check for Unit No.
Input display:
Cur. Address Check
F1 F2 F3 F4
Auto descending panel
Ref. address
Unit No.
All
Operation Down / Up
Panel will stop in 30 sec.
Keep clear, panel descending.
Cur. Address Check
F1 F2 F3 F4