Smartwares C794IP Installation And Operating Instructions Manual page 12

In most cases, you can successfully add the camera according to the steps above. However, the
camera will not find the network if Wi-Fi router turns off the SSID broadcasting function. Please
enable the SSID broadcasting to complete the settings.
Note:
In soft AP mode, the GREEN LED long flashes once followed by 2 short flashes. In normal
mode, the LED is flashing in green.
Most Wi-Fi routers broadcast the Service Set Identifier (SSID) by default. This is the
name of your wireless network, and SSID broadcasting is how Wi-Fi-enabled devices find
networks.
The camera will only accept SSID composed with English alphabet characters and Arabic
numbers. Non-English and special characters (!@#$%, etc.) will not be accepted.
If you fail to add the camera for several times, please press and hold the "Reset" button for
5 seconds to reset it.
11