DB Drive WDX G3 User Manual page 6

4Ω DVC WIRING CONFIGURATIONS
You can change the wiring configuration of your speakers (Series, Parallel and Series / Parallel) to match
the impedance loads that maximizes the power output of you amplifier. Wiring the same woofer or multiple
woofers in these three different wiring configurations will result in different impedance loads.
Series: Is the method of wiring of alternate positive with negative terminals (string method) (Illustration below)
Parallel: Is the method of wiring where you wire match 2 speaker terminals with positive to positive terminal
and negative to negative. (Illustration below)
Series/Parallel: This configuration is a combination of both series and parallel. We recommend series for the
terminal and parallel for the leads to amp. (Illustration below)
• SERIES/PARALLEL •
• SERIES/PARALLEL •
6