Advertisement
■
High power operation
High power (Hi POWER)
• The Hi POWER (high power operation) mode
automatically controls room temperature, airflow and
operation mode so that the room is quickly cooled in
summer and warmed in winter.
SWING
FIX
Setting Hi POWER mode
1
Hi POWER button
Press the Hi POWER button after starting any
operation. At the same time, the "Hi POWER" mark
on the remote controller is indicated.
Cancelling Hi POWER mode
1
Hi POWER button
Press the Hi POWER button once again. At the
same time, the "Hi POWER" mark on the remote
controller goes out.
• The Hi POWER mode cannot be activated in the
DRY and
FAN ONLY operation and when the ON
TIMER operation is reserved.
• Hi POWER mode is not available for group control.
When Hi POWER is transmitted to the Header indoor
unit, the receiving sound is heard but the Hi POWER
mode will not be performed. Please cancel the
Hi POWER mode.
FAN
QUIET
1
Hi POWER
CAUTION
■
Quiet operation
• The QUIET mode provides quiet operating status
by automatically setting the fan speed to the lowest
speed.
Setting QUIET mode
1
QUIET button
Press the QUIET button after starting any operation.
At the same time, the
Cancelling QUIET mode
1
QUIET button
Press the QUIET button once again.
At the same time, the
controller disappears.
The QUIET mode cannot be activated in the
operation.
NOTE
Under certain conditions, the quiet operation may not
provide adequate cooling or heating due to the feature
of quietness.
- 12 -
Operations Manual
SWING
FAN
1
FIX
QUIET
Hi POWER
mark is indicated.
mark on the remote
CAUTION
DRY
12-EN
Advertisement
