Table of Contents
Advertisement
#
Headlight Bulb
TOP mark
Rubber dust cover
Connector
Pin
Bulb
Electrical Trouble
Remove the headlight case.
1.
Disconnect the connector.
2.
Remove the rubber dust cover.
3.
Slightly press down on the pin and turn it
4.
clockwise until it releases from the
headlight bulb housing.
Remove the bulb.
5.
Install a new bulb in the reverse order of
6.
removal.
Install the rubber dust cover with its
u
TOP mark facing up.
Install the remaining parts in the reverse
7.
order of removal.
Do not touch the glass surface with your
fingers. If you touch the bulb with your bare
hands, clean it with a cloth moistened with
alcohol.
Burned-out Light Bulb
u
P. 54
2
Continued
73
Advertisement
Chapters
Table of Contents
