Xiaomi Mi Sphere Camera Kit Manual
Also See for Mi Sphere Camera Kit:

Advertisement

Xiaomi Mi Sphere Camera Kit Manual

Product overview


Package contents: Mi Sphere Camera, USB Cable, Tripod, Pouch, User Manual

Your device

Device Overview

Instructions

  1. Turning on/off
    Turning on: Press the Power/Mode button. Photo and video status indicators will light up, and the indicator of the current mode will remain steady. Turning off: Press and hold the Power/Mode button until the status indicator of the current mode is off.
  2. Switching between photo and video mode
    Press the Power/Mode button to switch between photo and video modes. Video mode is set as factory default.
  3. Recording videos
    Video status indicator is steady blue in video mode.
    Press the Shutter/OK button to start recording.
    Video status indicator will turn red and start blinking.
    Press the Shutter/OK button to stop recording.
    Video status indicator will flash 3 times and turn steady blue again.
  4. Short videos
    While in video mode, long press the Shutter/OK button to record a short video. Video status indicator will turn red and start blinking. Your camera will stop recording automatically in 10 seconds. The length of short videos can be set in the App.
  5. Taking photos
    Photo status indicator is steady blue in the photo mode. Press the Shutter/OK button to take a photo. Photo status indicator will flash once with every photo you take.
  6. Resetting Wi-Fi password
    Press and hold the Wi-Fi button for 5 seconds to reset Wi-Fi password.
  7. Battery indicator
    1. Charger isn't connected
      Low battery: Battery indicator is flashing red.
      Out of power: Battery indicator is off.
    2. Charger is connected
      Charging: Battery indicator is steady red.
      Fully charged: Battery indicator turns steady blue.
  8. Standby
    Your camera will go into standby mode if you don't use it for 2 minutes. Battery indicator will turn blue and start blinking. Press any button to wake up your camera.

Connecting your device

  1. Download and install the camera App.
  2. Press the Wi-Fi button on your camera. Wi-Fi indicator will start flashing blue.
  3. Open the App and tap the camera button. Wi-Fi indicator will stop flashing when the connection is established.
  4. The default Wi-Fi password of your camera is 12345678.

Download the App
Search for "Mi Sphere Camera" in your preferred App market or scan this QR code to download the App.

www.apple.com

play.google.com

Scan QR code to download

Maintenance

  1. The camera may lower its performance or shut down automatically while being used in extreme weather conditions.
  2. Do not use the camera when air temperature or humidity are changing drastically; otherwise, condensation may appear inside the camera. If this happens, open the Mini-USB port cover to facilitate evaporation.
  3. Do not place the camera on rough surfaces directly to avoid scratching the lens.
  4. Mi Sphere Camera passed our controlled lab tests which showed that it meets the IP67 standard. It means that Mi Sphere Camera is protected from dust and the effects of immersion in water to depth up to 1 meter for 30 minutes. However, the camera's dust-, water-, and splash-resistance capabilities are not permanent and will decrease as the camera is being used.


RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Notices for Customers in the USA

FCC Statement

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

  • This device may not cause harmful interference.
  • This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

IC Statement

This device complies with Industry Canada's license-exempt RSSs. Operation is subject to the following two conditions:

  • This device may not cause interference.
  • This device must accept any interference, including interference that may cause unde-sired operation of the device.

Notices for Customers in Europe

EU Regulatory Conformance

Hereby, we, Beijing MADV Technology Co., Ltd. declares that this equipment type QJXJ01 FJ is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at www.madv360.com

RED RF Output table

Function Frequency Maximum Out Power (EIRP)
WiFi 2412-2472 Mhz 17.64 dBm
Bluetooth 2402-2480 Mhz 5.72 dBm

Please don't use the camera in a confined environment with temperature higher than 35 degrees Celsius.

Specs

Product name: Mi Sphere Camera Kit
Model: QJTZ01FJ
Dimensions: 78.00x67.40x24.03mm
Weight: 108g
Input: 5V 2A
Focal length: 1.43
Aperture: f/2.0
Protection: IP67
Standby power consumption: 3.8W
Storage temperature: -20—45°C
Storage humidity: 10%—90%
Battery capacity: 1600mAh
Image resolution: up to 6912x3456
Video resolution: up to 3456x1728
Wireless connectivity: Wi-Fi IEEE 802.11b/g/n 2.4GHz, Bluetooth 4.0
Expandable storage options: microSD card (up to 128GB, at least Class 10).
Use U3 microSD cards for recording video in the highest resolution.
System requirements: Android 5.0/iOS 8 or later

Power adapter specs:
Input: 100-240~50/60Hz
Output: 5V 2A/9V 2A/12V 1.5A

Supported standards:
QC2.0, USB-A

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the following:

  1. Read all instructions.
  2. To protect against unexpected damage do not immerse the whole appliances in water orother liquid.
  3. shock hazard The use of accessory attachments not recommended by the appliance manufacturermay cause a fire or personal injury.
  4. Close supervision is necessary when any appliance is used by or near children.
  5. shock hazard Disconnect the charger from the socket when not in use, failing to do so may result in fire or other unexpected danger.
  6. Do not place on or near a hot gas or electric burner, or in a heated oven.
  7. Do not use appliance for other than intended use.

SAVE THESE INSTRUCTIONS

Principal: Xiaomi Communications Co., Ltd.
Manufacturer: Beijing MADV Technology Co., Ltd. (a Mi Ecosystem Company)
Address: 30-17 Shixing St, Shijingshan District, Beijing, China
Online support: www.mi.com/us/supports
Go to www.mi.com to learn more

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Xiaomi Mi Sphere Camera Kit Manual

Advertisement

Need Assistance?

Do you have a question about the Mi Sphere Camera Kit that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents