Table of Contents
Advertisement
Install Network Upgrade Module
Your Synology NAS has a Network Upgrade slot which allows you to install network upgrade module for LAN port
expansion.
To install a network upgrade module
1 Shut down your Synology NAS. Disconnect all cables from your Synology NAS to prevent possible damage.
2 Remove the two screws on the PCIe expansion shield to remove the shield.
3 Insert the network upgrade module and tighten the two screws to secure the newly inserted module.
Note:
Confirm that the network upgrade module is fully inserted. Otherwise, the network upgrade module
might not be able to function properly.
17 Chapter 2: Hardware Setup
Advertisement
Table of Contents
