Inserting The Battery - Panasonic LUMIX DMC-TZ25 Operating Instructions Manual

To charge the battery, insert it into the camera.
• Set the camera ON/OFF switch to OFF
Slide to the [OPEN] position
and open the card/battery
door
Insert the battery all the way
• Make sure to insert the battery in the
correct orientation.
• Insert all the way firmly until a locking
sound is heard, and check that the lever is
hooked over the battery.
Close the card/battery door
• Slide to the [LOCK] position.
■
To remove battery
Move the lever in the card/battery
compartment in the direction of the arrow.
●
Always use genuine Panasonic batteries.
●
If you use other batteries, we cannot guarantee the quality of this product.
●
Remove battery from camera after use.
• Keep the battery in a plastic bag, making sure that it is kept away from metallic objects (such as
clips) when carrying or storing the battery.
●
To remove the battery, turn the camera off and wait until the LUMIX indicator on the LCD monitor
goes off. (Failure to wait may cause the camera to malfunction and may damage the card or
recorded data.)

Inserting the battery

- 11 -
Charging battery
Release lever
[OPEN] [LOCK]
Lever