Table of Contents
Advertisement
SAFETY INFORMATION
INDICATIONS FOR USE
The Kinetik Wellbeing Smart Body Analyser Scale measures weight and
uses bio-electrical impedance analysis(BIA) technology to estimate body
fat and heart rate in generally healthy children 10-17 years old and healthy
adults.
It is intended for use in the domestic setting only.
Tips
To ensure the accuracy of measurement, please follow below instructions
when you start measurement.
Place the scale on a flat, hard surface. Soft surfaces such as carpet will affect
the performance of the scale.
Step onto the platform with bare feet. Stand still and keep full contact with the
electrodes until the measurement is complete.
Start measurement at least two hours after Getting up or Dinning.
Avoid measurement immediately after strenuous exercise, sauna or bath,
drinking, and dining.
Always start measurement in the same time slot and on the same scale located
on the same flat, hard surface.
For maximum accuracy and repeatability, it is recommended that you should
use the device in the same time of the day and on the same location.
The condition of the skin on the bottom of your feet can affect the reading.
The natural effects of aging or activity can make this skin hard. Take the
reading with clean, slightly damp feet for best accuracy. If you are having a
problem on operating this scale please contact customer service.
Body fat percentage estimates will vary with the amount of water in the body,
and can be affected by dehydration or over-hydration due to such factors as
alcohol consumption, menstruation, illness, intense exercise, etc.
4
OVERVIEW
Device Components
Electrodes
List
1. Smart Body Analyser Scale BTS200
2. Four AAA-size Batteries (1.5V per each)
3. User Manual
LED Display
Electrodes
UNIT Button
Battery Compartment
Sensor
5
Advertisement
Table of Contents
