Advertisement
Do not use this appliance if any part of it has been under water.
Immediately call a qualified service technician to inspect the appliance and
replace any part of the electrical system which has been under water.
Grounding Instructions:
1. Make sure the heater is switched OFF before plugging the heater into the
outlet.
2. Connect to properly grounded outlets only.
3. Note: The power cord has a polarized plug (with one blade wider than the
other) that will only fit in a polarized outlet one way.
4. If it does not insert easily try reversing the plug.
5. If it still does not fit contact your electrician to replace your outlet.
6. DO NOT defeat the safety purpose of the polarized plug.
Automatic Overheat Safety Control
This heater is equipped with an internal heat limiting thermostat and
overheat protection circuit. When a potential overheat temperature is
reached, the system will automatically shut the heater off. Unplug heater
allow to cool down for 10 minutes, and then restart.
Cleaning and Maintenance
Any electrical repairs or rewiring of this unit should be carried out by a
licensed electrician and in accordance with national and local codes.
Before cleaning the appliance, disconnect it from the power outlet and let it
cool down.
In order to protect the enclosure, don't splash water onto the heater, and
never use a solvent like gasoline, isoamyl acetate, toluene, etc. to clean
the heater. DO NOT open the heater or attempt to clean the inside of this
appliance.
SAVE THESE INSTRUCTIONS
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN - NO SERVICEABLE PARTS INSIDE
[5]
Advertisement
