Installation
Mounting 2/2
Connect the Ethernet cable, and any
other cables relevant to your installation,
to the Alarm Console.
Press the power button once and wait
for the Status LED to turn on.
Please note: Bootup sequence may take
several seconds.
Engage the three hook features on the
mount plate and slide the console
down.
To secure, tighten the captive security
screw, using the provided T10 Security
Torx screwdriver.
10
Verkada Inc. 406 E 3rd Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.