ABB TMAX XT XT6 ELECTRONIC Instruction Handbook Manual page 18

18
INSTRUCTION HANDBOOK
44
Manually pull the shaft as indicated by the
arrow and by means of the flat screwdriver
remove the 3 benzings.
46
By gravity let the plates fall down from the
breaking part main structure.
48
By gravity let the nuts and washers connected
with screws removed at previous step fall
down from the breaking part main structure.
45
Lift the breaking part main structure and let
the I3 assemblies separate from the breaking
part main structure by gravity.
47
By means of the allen key unscrew the 3 screws
located in the bottom part of the breaking part
main structure.
49
Manually lift the mobile contacts assembly and
remove it.