Advertisement
Disassembly instruction tmaX Xt Xt6 electronic
38
By means of the flat screwdriver clean from
silicone rear part of the breaking part main
structure.
40
By means of pliers remove the washers located
in housing of the nuts removed at previous
step.
42
By means of the flat screwdriver push out from
the breaking part main structure the 3 dowels.
39
By means of the tube key unscrew the 4 nuts
located in the rear part of the breaking part
main structure.
41
By means of the cross screwdriver unscrew the
2 screws located at both sides of rear part of
the breaking part main structure.
43
By means of the allex key unscrew the 6 screws
located in the bottom part of the breaking part
main structure.
17
Advertisement
