Advertisement
Quick Links
USER GUIDE
KeyMander 2 Keyboard/Mouse Adapter plus Controller Crossover
GE1337P2
Overview
The KeyMander 2 is a USB Gamepad Emulator that allows you to use a keyboard and mouse with a
PS/Xbox/Nintendo Switch game console. The KeyMander 2 has an easy to use app that allows you to
customize all game controller buttons for use with a keyboard and mouse. Advanced features allow you to
custom map keys, create macros, set turbo buttons, and adjust the mouse sensitivity. Quick macro setup
allows you to program up to 8 button press combinations and set it to a single key, so one press executes
multiple commands.
The KeyMander 2 app also allows you to download preconfigured game profiles, as well as create, edit and
share your own profiles, then back them up to our cloud storage service.
With the KeyMander 2 you can create an unlimited number of keyboard and mouse configuration profiles -
each suited for specific game play. Profiles can be switched and configured during game play for quick access.
The KeyMander 2 gives gamers the ability to customize and fine tune all controls for the expert advantage with
every game.
With KeyMander 2 you can:
Use a keyboard and mouse on a PS4, PS3, Xbox One, Xbox 360 and Nintendo Switch game consoles
Remap all Gamepad controls to the keyboard and mouse using the K2 App for Android/iOS
Create custom profiles for different games or game characters
Simultaneously use a keyboard, mouse, and PS/Xbox/Nintendo Switch controller
Play using a controller from a different console
Backup your game profiles to our free cloud storage
Create Macro commands which perform up to 8 controller commands with a single key press
Program a key for Microphone mute or PTT (push-to-talk) on headsets without mute functions
Use Turbo Mode to make semi-auto guns operate as full-auto guns in compatible games
Receive OTA (over-the-air) firmware upgrades for easier and faster product updates
Package Contents
1 x KeyMander 2
1 x Micro USB Cable
1 x Quick Start Guide
1 x Warranty Card
Note: an optional micro USB power supply may be required with certain RGB keyboards that have a larger than normal current draw.
1 | 29
Rev 9/18/20
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Kaliber Gaming GE1337P2
Summary of Contents for Kaliber Gaming GE1337P2
- Page 1 USER GUIDE KeyMander 2 Keyboard/Mouse Adapter plus Controller Crossover GE1337P2 Overview The KeyMander 2 is a USB Gamepad Emulator that allows you to use a keyboard and mouse with a PS/Xbox/Nintendo Switch game console. The KeyMander 2 has an easy to use app that allows you to customize all game controller buttons for use with a keyboard and mouse.
- Page 2 Power port and a USB power supply (minimum 2A output) such as a charger for a tablet or smartphone. 5. Game Console USB connector *Some gaming keyboards may have accessories that require more power than the KeyMander 2 is able to supply. Please visit http://www.IOGEAR.com/product/GE1337P2 for more information. 2 | 29 Rev 9/18/20...
- Page 3 Top View 1. Button 1: Bluetooth Pairing Button. Press to pair your mobile device with the KeyMander 2 app. This button is also used in conjunction with the Mode Button to enter the Firmware Upgrade Mode, and hardware reset. 2. LED Indicator. The LED indicator provides system alerts and feedback for different operating modes.
- Page 4 7. Press the Bluetooth Pairing Button to put KeyMander 2 into pairing mode, then press the Connect button on the Device tab of the K2 App (Image 1) and select GE1337P2 under DEVICES (Image 2). When the Device Tab shows the current profile and device settings the K2 App is ready to use (Image 3).
- Page 5 9. For PS4 Pro or PS4 Slim consoles using the DualShock 4 Slim controller (V2 controller with LED strip above touchpad), you will need to change the controller’s communication method from Bluetooth to USB in the PS4 settings menu. Go to Settings > Devices >...
- Page 6 7. Press the Bluetooth Pairing Button to put KeyMander 2 into pairing mode, then press the Connect button on the Device tab of the K2 App on your mobile device (Image 1) and select GE1337P2 under DEVICES (Image 2). When the Device Tab shows the current profile and device settings it is ready to use (Image 3).
- Page 7 9. Open the Game Center tab on the K2 App and use the search function to find your game (Image 4). Select the Xbox One version by tapping on the game’s cover art image. The required in-game settings are shown abovethe download button (Image 5).
- Page 8 7. Press the Bluetooth Pairing Button to put KeyMander 2 into pairing mode, then press the Connect button on the Device tab of the K2 App on your mobile device (Image 1) and select GE1337P2 under DEVICES (Image 2). When the Device Tab shows the current profile and device settings it is ready to use (Image 3).
- Page 9 10. Enable Pro Controller Wired Communication. After changing the Auto-Sleep setting, scroll down the System Settings menu and select Controllers and Sensors. Change the Pro Controller Wired Communication mode to On as shown. 11. Open the Game Center tab on the K2 App and use the search function to find the game you want to play (Image 4).
- Page 10 Mouse Configuration Before you begin, there are four important settings that must be set properly for best mouse performance with KeyMander 2. Open the K2 App and select the default Gamepad profile for your game system, or download a preconfigured game profile for your game from the Game Center tab, then follow the instructions below. 1.
- Page 11 3. Use the K2 App to adjust the Deadzone settings for the mouse. Note: A properly set deadzone is normally the step where the aim/look view begins moving on its own in any axis. That means for example, if setting the X axis to 16 causes the aim/look view to begin slowly moving to the right, the correct X axis deadzone setting is 16.
- Page 12 Basic Operation The mouse is used for up/down and right/left movements, emulating the controller’s right stick as seen in the image below left. The controller buttons and directional pads are mapped to the keyboard as seen below right. Function Keys The function keys enable special features and profile switching without using the KeyMander 2 app.
-
Page 13: Function Mapping
Customizing Profiles The preloaded profile is for PlayStation 4 only. If you are a Nintendo Switch or Xbox One user, please select a profile that corresponds to your game system. These profiles are console specific but not game-specific, so once the proper default profile for your console is loaded the settings can be adjusted for the specific game you are playing. - Page 14 Turn Speed The Turn Speed slider adjusts the amount of acceleration that KeyMander 2 adds when moving your mouse. A setting of 0 on the slider is equal to zero acceleration added by KeyMander 2. Settings of 1-50 add progressively greater amounts of aim acceleration to compensate for games with a slow aim/look mechanic.
- Page 15 Walk Mode The Walk Mode function allows holding an additional key while also pressing one of the WASD keys to reduce movement speed when needed, like when sneaking up behind and enemy for example. To set the Walk Mode, Open the K2 App and select the Sensitivity option, then select the Walk Mode tab, to open the settings page.
- Page 16 Turbo Mode The Turbo Mode (F10 key) changes the actuation timing of a button from the keyboard or mouse to allow a faster repeat rate when held. You can enable or disable turbo for any controller button* and set the timing (0.1~1 second) as needed. This can be used in several ways, the most common is to increase the rate of fire and in effect make a semi- auto gun fully automatic where compatible.
- Page 17 Gamepad Vibration The Gamepad Vibration (F12 key) setting allows the tactile feedback from controller to be turned on and off as needed without having to open the game console menu. To turn controller vibration on or off press F12 on the keyboard or press the side button in the K2 App.
- Page 18 To prepare for the firmware upgrade, do the following: 1. Download the firmware .exe update file at https://www.iogear.com/support/dm/driver/GE1337P2 2. Follow the instructions to download the firmware upgrade. 3. Unzip the firmware upgrade package and connect the computer to the KeyMander 2.
- Page 19 4. When the Firmware Upgrade Utility opens read the License Agreement, select “I Agree” and click next. 5. The Firmware Utility will list the attached KeyMander2 devices, and should show your GE1337P2 if connected to the PC. 6. Click Next to perform the upgrade.
- Page 20 • As the Upgrade proceeds status messages appear in the Status Messages panel, and the progress toward completion is shown on the Progress bar. 7. After upgrade is complete click Finish and unplug the KeyMander 2 from the PC. 8. Reconnect the KeyMander 2’s USB to the PC, then press and hold BTN 1 and BTN 2 together for approximately 8 seconds to perform a factory reset to complete the firmware update.
Need help?
Do you have a question about the GE1337P2 and is the answer not in the manual?
Questions and answers