Maintenance And Control - VOLTA VT3 PRO Introduction And User's Manual

Table of Contents

Advertisement

4. MAINTENANCE AND CONTROL

Brake Maintenance
Brake pads wear out due to the working principle. It must be changed after a
certain time. Security level control and change should be done by authorized
services. Unreplaced brake pads cause poor performance of the brake system,
make noise, and in some cases even break other parts. Brakes should be checked
at every service.
Tire Pressure Check
Check the pressure levels of your tires daily. Above and below normal tire
pressures will affect the vehicle's handling, acceleration, fuel consumption and
performance.
Check your tires daily for punctures, cuts or any other unusual condition. Also on
the rims; can cause air loss in crushing, scratching and tilting. This type of damage
can cause your vehicle to unbalance and shake. In case of such situations, go to
your nearest authorized service and have the damage repaired.
vt3
WARNING
If the tire does not have the correct air pressure, it will wear out more quickly and its life will be shortened.
In addition, low-inflated tires can cause an accident as they reduce grip.
• If the tire pressure is too low, the tire may come off the rim.
Your tires will wear out with use. When your tread depth decreases, you should replace it. Depending on
the road, climate and usage conditions, your tire life may be extended or shortened. The user should
regularly check the tire pressure and tread depth. Tires with low tread depth will reduce grip, especially
on wet surfaces. The minimum tread depth is 1.5 mm for the front tire and 2.0 mm for the rear tire. Such
situations cause accidents.
12
Dimensions
14-2.50
240-310kPa/35-45 psi
14-2.50
240-310kPa/35-45 psi
www.volta.com.tr
Pressure

Advertisement

Table of Contents
loading

Table of Contents