Addition Of Volumes - Parkside 353556 2010 Operation And Safety Notes

3. Press the MEAS button
measure the length. The measured
length appears in the upper row
of the display
(width) will start flashing.
4. Press the MEAS button
measure the width. The measured
width appears in the upper row
of the display
(height) will start flashing.
5. Press the MEAS button
measure the height. The measured
height appears in the upper row
of the display
volume calculation appear in the
lower row
Note: You can switch between m³
and cu.ft. To switch between m³ and
cu.ft, press and hold the MODE but-
ton
10
ment unit

Addition of volumes

1. Measure a volume as described in
the section "Measuring volumes".
32 GB
and the letter "W"
2
and the letter "H"
2
. The results of the
2
.
21
for 3 seconds. The measure-
will be changed.
22
twice to
6
20
twice to
6
20
twice to
6
20